#----------------------------------------------------------- # PlanAhead v13.3 (64-bit) # Build 147507 by hdbuild on Tue Oct 4 19:13:50 MDT 2011 # Start of session at: Wed Feb 15 15:13:16 2012 # Process ID: 3932 # Log file: X:/My Documents/ec311/lab1/planAhead_run_1/planAhead.log # Journal file: X:/My Documents/ec311/lab1/planAhead_run_1/planAhead.jou #----------------------------------------------------------- INFO: [Common-78] Attempting to get a license: PlanAhead INFO: [Common-82] Got a license: PlanAhead INFO: [Device-25] Loading parts and site information from C:/Xilinx/13.3/ISE_DS/PlanAhead\parts\arch.xmlParsing RTL primitives file [C:/Xilinx/13.3/ISE_DS/PlanAhead\parts\xilinx\rtl\prims\rtl_prims.xml] Finished parsing RTL primitives file [C:/Xilinx/13.3/ISE_DS/PlanAhead\parts\xilinx\rtl\prims\rtl_prims.xml] start_gui source {X:/My Documents/ec311/lab1/pa.fromHdl.tcl} # create_project -name lab1 -dir "X:/My Documents/ec311/lab1/planAhead_run_1" -part xc6slx16csg324-3 Parsing template File [C:/Xilinx/13.3/ISE_DS/ISE\data\projnav\templates\verilog.xml]. Finished parsing template File [C:/Xilinx/13.3/ISE_DS/ISE\data\projnav\templates\verilog.xml]. Parsing template File [C:/Xilinx/13.3/ISE_DS/ISE\data\projnav\templates\vhdl.xml]. Finished parsing template File [C:/Xilinx/13.3/ISE_DS/ISE\data\projnav\templates\vhdl.xml]. Parsing template File [C:/Xilinx/13.3/ISE_DS/ISE\data\projnav\templates\ucf.xml]. Finished parsing template File [C:/Xilinx/13.3/ISE_DS/ISE\data\projnav\templates\ucf.xml]. # set_param project.pinAheadLayout yes # set srcset [get_property srcset [current_run -impl]] # set_property top ALU $srcset # set_property target_constrs_file "ALU.ucf" [current_fileset -constrset] Adding file 'X:\My Documents\ec311\lab1\ALU.ucf' to fileset 'constrs_1' CRITICAL WARNING: [Designutils-735] The top module "ALU" specified for this project can not be validated. The current project is using automatic hierarchy update mode, and hence a new suitable replacement top will be automatically selected. If this is not desired, please change the hierarchy update mode to one of the manual compile order modes first, and then set top to any desired value. # set hdlfile [add_files [list {Negate_3.vf}]] # set_property file_type Verilog $hdlfile # set_property library work $hdlfile # set hdlfile [add_files [list {Negate_2.vf}]] # set_property file_type Verilog $hdlfile # set_property library work $hdlfile # set hdlfile [add_files [list {Negate_1.vf}]] # set_property file_type Verilog $hdlfile # set_property library work $hdlfile # set hdlfile [add_files [list {Negate_0.vf}]] # set_property file_type Verilog $hdlfile # set_property library work $hdlfile # set hdlfile [add_files [list {Modulo_3.vf}]] # set_property file_type Verilog $hdlfile # set_property library work $hdlfile # set hdlfile [add_files [list {Modulo_1.vf}]] # set_property file_type Verilog $hdlfile # set_property library work $hdlfile # set hdlfile [add_files [list {Modulo_0.vf}]] # set_property file_type Verilog $hdlfile # set_property library work $hdlfile # set hdlfile [add_files [list {Divide_3.vf}]] # set_property file_type Verilog $hdlfile # set_property library work $hdlfile # set hdlfile [add_files [list {Divide_2.vf}]] # set_property file_type Verilog $hdlfile # set_property library work $hdlfile # set hdlfile [add_files [list {Divide_1.vf}]] # set_property file_type Verilog $hdlfile # set_property library work $hdlfile # set hdlfile [add_files [list {Divide_0.vf}]] # set_property file_type Verilog $hdlfile # set_property library work $hdlfile # set hdlfile [add_files [list {sev_seg_disp.vf}]] # set_property file_type Verilog $hdlfile # set_property library work $hdlfile # set hdlfile [add_files [list {Negate.vf}]] # set_property file_type Verilog $hdlfile # set_property library work $hdlfile # set hdlfile [add_files [list {Modulo.vf}]] # set_property file_type Verilog $hdlfile # set_property library work $hdlfile # set hdlfile [add_files [list {Divide.vf}]] # set_property file_type Verilog $hdlfile # set_property library work $hdlfile # set hdlfile [add_files [list {ALU.vf}]] # set_property file_type Verilog $hdlfile # set_property library work $hdlfile # add_files [list {ALU.ucf}] -fileset [get_property constrset [current_run]] # open_rtl_design -part xc6slx16csg324-3 INFO: [PlanAhead-58] Using Verific elaboration Parsing VHDL file "C:/Xilinx/13.3/ISE_DS/PlanAhead\parts\xilinx\rtl\lib\synplify\synattr.vhd" into library synplify Analyzing Verilog file "X:\My Documents\ec311\lab1\Negate.vf" into library work Loading clock regions from C:/Xilinx/13.3/ISE_DS/PlanAhead\parts/xilinx/spartan6/spartan6lx/xc6slx16/ClockRegion.xml Loading clock buffers from C:/Xilinx/13.3/ISE_DS/PlanAhead\parts/xilinx/spartan6/spartan6lx/xc6slx16/ClockBuffers.xml Loading package pin functions from C:/Xilinx/13.3/ISE_DS/PlanAhead\parts\xilinx\spartan6/PinFunctions.xml... Loading package from C:/Xilinx/13.3/ISE_DS/PlanAhead\parts/xilinx/spartan6/spartan6lx/xc6slx16/csg324/Package.xml Loading io standards from C:/Xilinx/13.3/ISE_DS/PlanAhead\./parts/xilinx/spartan6/IOStandards.xml Loading device configuration modes from C:/Xilinx/13.3/ISE_DS/PlanAhead\parts\xilinx\spartan6/ConfigModes.xml Loading list of drcs for the architecture : C:/Xilinx/13.3/ISE_DS/PlanAhead\./parts/xilinx/spartan6/drc.xml Parsing UCF File [X:\My Documents\ec311\lab1\ALU.ucf] CRITICAL WARNING: [Constraints-11] Could not find net or pin 'A' [X:\My Documents\ec311\lab1\ALU.ucf:4] CRITICAL WARNING: [Constraints-11] Could not find net or pin 'AN0' [X:\My Documents\ec311\lab1\ALU.ucf:5] CRITICAL WARNING: [Constraints-11] Could not find net or pin 'AN1' [X:\My Documents\ec311\lab1\ALU.ucf:6] CRITICAL WARNING: [Constraints-11] Could not find net or pin 'AN2' [X:\My Documents\ec311\lab1\ALU.ucf:7] CRITICAL WARNING: [Constraints-11] Could not find net or pin 'AN3' [X:\My Documents\ec311\lab1\ALU.ucf:8] CRITICAL WARNING: [Constraints-11] Could not find net or pin 'B' [X:\My Documents\ec311\lab1\ALU.ucf:9] CRITICAL WARNING: [Constraints-11] Could not find net or pin 'C' [X:\My Documents\ec311\lab1\ALU.ucf:10] CRITICAL WARNING: [Constraints-11] Could not find net or pin 'D' [X:\My Documents\ec311\lab1\ALU.ucf:11] CRITICAL WARNING: [Constraints-11] Could not find net or pin 'S0' [X:\My Documents\ec311\lab1\ALU.ucf:12] CRITICAL WARNING: [Constraints-11] Could not find net or pin 'S1' [X:\My Documents\ec311\lab1\ALU.ucf:13] CRITICAL WARNING: [Constraints-11] Could not find net or pin 'a_out' [X:\My Documents\ec311\lab1\ALU.ucf:14] CRITICAL WARNING: [Constraints-11] Could not find net or pin 'b_out' [X:\My Documents\ec311\lab1\ALU.ucf:15] CRITICAL WARNING: [Constraints-11] Could not find net or pin 'c_out' [X:\My Documents\ec311\lab1\ALU.ucf:16] CRITICAL WARNING: [Constraints-11] Could not find net or pin 'd_out' [X:\My Documents\ec311\lab1\ALU.ucf:17] CRITICAL WARNING: [Constraints-11] Could not find net or pin 'e_out' [X:\My Documents\ec311\lab1\ALU.ucf:18] CRITICAL WARNING: [Constraints-11] Could not find net or pin 'f_out' [X:\My Documents\ec311\lab1\ALU.ucf:19] CRITICAL WARNING: [Constraints-11] Could not find net or pin 'g_out' [X:\My Documents\ec311\lab1\ALU.ucf:20] CRITICAL WARNING: [Constraints-11] Could not find net or pin 'sign' [X:\My Documents\ec311\lab1\ALU.ucf:21] Finished Parsing UCF File [X:\My Documents\ec311\lab1\ALU.ucf] INFO: [Designutils-20] Invalid constraints found, use command 'write_ucf -constraints invalid ' to save all the invalid constraints to a file INFO: [PlanAhead-566] Unisim Transformation Summary: No Unisim elements were transformed.open_rtl_design: Time (s): 13.288w. Memory (MB): 788.289p 223.703g exit stop_gui INFO: [PlanAhead-261] Exiting PlanAhead... INFO: [Common-83] Releasing license: PlanAhead