From 59d89428d6160fb672c2b6a41339505cc69344d0 Mon Sep 17 00:00:00 2001 From: Michael Abed Date: Fri, 17 Feb 2012 12:10:31 -0500 Subject: finish it --- ALUSHOW_map.mrp | 206 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 206 insertions(+) create mode 100755 ALUSHOW_map.mrp (limited to 'ALUSHOW_map.mrp') diff --git a/ALUSHOW_map.mrp b/ALUSHOW_map.mrp new file mode 100755 index 0000000..d5383c2 --- /dev/null +++ b/ALUSHOW_map.mrp @@ -0,0 +1,206 @@ +Release 13.3 Map O.76xd (nt64) +Xilinx Mapping Report File for Design 'ALUSHOW' + +Design Information +------------------ +Command Line : map -intstyle ise -p xc6slx16-csg324-3 -w -logic_opt off -ol +high -t 1 -xt 0 -register_duplication off -r 4 -global_opt off -mt off -ir off +-pr off -lc off -power off -o ALUSHOW_map.ncd ALUSHOW.ngd ALUSHOW.pcf +Target Device : xc6slx16 +Target Package : csg324 +Target Speed : -3 +Mapper Version : spartan6 -- $Revision: 1.55 $ +Mapped Date : Thu Feb 16 21:15:30 2012 + +Design Summary +-------------- +Number of errors: 0 +Number of warnings: 0 +Slice Logic Utilization: + Number of Slice Registers: 0 out of 18,224 0% + Number of Slice LUTs: 860 out of 9,112 9% + Number used as logic: 860 out of 9,112 9% + Number using O6 output only: 365 + Number using O5 output only: 1 + Number using O5 and O6: 494 + Number used as ROM: 0 + Number used as Memory: 0 out of 2,176 0% + +Slice Logic Distribution: + Number of occupied Slices: 268 out of 2,278 11% + Nummber of MUXCYs used: 540 out of 4,556 11% + Number of LUT Flip Flop pairs used: 860 + Number with an unused Flip Flop: 860 out of 860 100% + Number with an unused LUT: 0 out of 860 0% + Number of fully used LUT-FF pairs: 0 out of 860 0% + Number of slice register sites lost + to control set restrictions: 0 out of 18,224 0% + + A LUT Flip Flop pair for this architecture represents one LUT paired with + one Flip Flop within a slice. A control set is a unique combination of + clock, reset, set, and enable signals for a registered element. + The Slice Logic Distribution report is not meaningful if the design is + over-mapped for a non-slice resource or if Placement fails. + +IO Utilization: + Number of bonded IOBs: 18 out of 232 7% + Number of LOCed IOBs: 18 out of 18 100% + +Specific Feature Utilization: + Number of RAMB16BWERs: 0 out of 32 0% + Number of RAMB8BWERs: 0 out of 64 0% + Number of BUFIO2/BUFIO2_2CLKs: 0 out of 32 0% + Number of BUFIO2FB/BUFIO2FB_2CLKs: 0 out of 32 0% + Number of BUFG/BUFGMUXs: 0 out of 16 0% + Number of DCM/DCM_CLKGENs: 0 out of 4 0% + Number of ILOGIC2/ISERDES2s: 0 out of 248 0% + Number of IODELAY2/IODRP2/IODRP2_MCBs: 0 out of 248 0% + Number of OLOGIC2/OSERDES2s: 0 out of 248 0% + Number of BSCANs: 0 out of 4 0% + Number of BUFHs: 0 out of 128 0% + Number of BUFPLLs: 0 out of 8 0% + Number of BUFPLL_MCBs: 0 out of 4 0% + Number of DSP48A1s: 0 out of 32 0% + Number of ICAPs: 0 out of 1 0% + Number of MCBs: 0 out of 2 0% + Number of PCILOGICSEs: 0 out of 2 0% + Number of PLL_ADVs: 0 out of 2 0% + Number of PMVs: 0 out of 1 0% + Number of STARTUPs: 0 out of 1 0% + Number of SUSPEND_SYNCs: 0 out of 1 0% + +Average Fanout of Non-Clock Nets: 4.13 + +Peak Memory Usage: 363 MB +Total REAL time to MAP completion: 11 secs +Total CPU time to MAP completion: 10 secs + +Table of Contents +----------------- +Section 1 - Errors +Section 2 - Warnings +Section 3 - Informational +Section 4 - Removed Logic Summary +Section 5 - Removed Logic +Section 6 - IOB Properties +Section 7 - RPMs +Section 8 - Guide Report +Section 9 - Area Group and Partition Summary +Section 10 - Timing Report +Section 11 - Configuration String Information +Section 12 - Control Set Information +Section 13 - Utilization by Hierarchy + +Section 1 - Errors +------------------ + +Section 2 - Warnings +-------------------- + +Section 3 - Informational +------------------------- +INFO:MapLib:562 - No environment variables are currently set. +INFO:LIT:244 - All of the single ended outputs in this design are using slew + rate limited output drivers. The delay on speed critical single ended outputs + can be dramatically reduced by designating them as fast outputs. +INFO:Pack:1716 - Initializing temperature to 85.000 Celsius. (default - Range: + 0.000 to 85.000 Celsius) +INFO:Pack:1720 - Initializing voltage to 1.140 Volts. (default - Range: 1.140 to + 1.260 Volts) +INFO:Map:215 - The Interim Design Summary has been generated in the MAP Report + (.mrp). +INFO:Pack:1650 - Map created a placed design. + +Section 4 - Removed Logic Summary +--------------------------------- + 6 block(s) optimized away + +Section 5 - Removed Logic +------------------------- + +Optimized Block(s): +TYPE BLOCK +BUF XLXI_2/XLXI_5 +BUF XLXI_2/XLXI_6 +BUF XLXI_2/XLXI_7 +BUF XLXI_2/XLXI_8 +GND XST_GND +VCC XST_VCC + +To enable printing of redundant blocks removed and signals merged, set the +detailed map report option and rerun map. + +Section 6 - IOB Properties +-------------------------- + ++---------------------------------------------------------------------------------------------------------------------------------------------------------+ +| IOB Name | Type | Direction | IO Standard | Diff | Drive | Slew | Reg (s) | Resistor | IOB | +| | | | | Term | Strength | Rate | | | Delay | ++---------------------------------------------------------------------------------------------------------------------------------------------------------+ +| A<0> | IOB | INPUT | LVCMOS25 | | | | | | | +| A<1> | IOB | INPUT | LVCMOS25 | | | | | | | +| A<2> | IOB | INPUT | LVCMOS25 | | | | | | | +| A<3> | IOB | INPUT | LVCMOS25 | | | | | | | +| AN0 | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | | +| AN1 | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | | +| AN2 | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | | +| AN3 | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | | +| S<0> | IOB | INPUT | LVCMOS25 | | | | | | | +| S<1> | IOB | INPUT | LVCMOS25 | | | | | | | +| ao | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | | +| bo | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | | +| co | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | | +| do | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | | +| eo | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | | +| fo | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | | +| go | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | | +| sign | IOB | OUTPUT | LVCMOS25 | | 12 | SLOW | | | | ++---------------------------------------------------------------------------------------------------------------------------------------------------------+ + +Section 7 - RPMs +---------------- + +Section 8 - Guide Report +------------------------ +Guide not run on this design. + +Section 9 - Area Group and Partition Summary +-------------------------------------------- + +Partition Implementation Status +------------------------------- + + No Partitions were found in this design. + +------------------------------- + +Area Group Information +---------------------- + + No area groups were found in this design. + +---------------------- + +Section 10 - Timing Report +-------------------------- +A logic-level (pre-route) timing report can be generated by using Xilinx static +timing analysis tools, Timing Analyzer (GUI) or TRCE (command line), with the +mapped NCD and PCF files. Please note that this timing report will be generated +using estimated delay information. For accurate numbers, please generate a +timing report with the post Place and Route NCD file. + +For more information about the Timing Analyzer, consult the Xilinx Timing +Analyzer Reference Manual; for more information about TRCE, consult the Xilinx +Command Line Tools User Guide "TRACE" chapter. + +Section 11 - Configuration String Details +----------------------------------------- +Use the "-detail" map option to print out Configuration Strings + +Section 12 - Control Set Information +------------------------------------ +Use the "-detail" map option to print out Control Set Information. + +Section 13 - Utilization by Hierarchy +------------------------------------- +Use the "-detail" map option to print out the Utilization by Hierarchy section. -- cgit v1.2.3