Release 13.3 par O.76xd (nt64) Copyright (c) 1995-2011 Xilinx, Inc. All rights reserved. ECE-PHO115-08:: Thu Feb 16 21:15:44 2012 par -w -intstyle ise -ol high -mt off ALUSHOW_map.ncd ALUSHOW.ncd ALUSHOW.pcf Constraints file: ALUSHOW.pcf. Loading device for application Rf_Device from file '6slx16.nph' in environment C:\Xilinx\13.3\ISE_DS\ISE\. "ALUSHOW" is an NCD, version 3.2, device xc6slx16, package csg324, speed -3 Initializing temperature to 85.000 Celsius. (default - Range: 0.000 to 85.000 Celsius) Initializing voltage to 1.140 Volts. (default - Range: 1.140 to 1.260 Volts) INFO:Par:282 - No user timing constraints were detected or you have set the option to ignore timing constraints ("par -x"). Place and Route will run in "Performance Evaluation Mode" to automatically improve the performance of all internal clocks in this design. Because there are not defined timing requirements, a timing score will not be reported in the PAR report in this mode. The PAR timing summary will list the performance achieved for each clock. Note: For the fastest runtime, set the effort level to "std". For best performance, set the effort level to "high". Device speed data version: "PRODUCTION 1.20 2011-10-03". Device Utilization Summary: Slice Logic Utilization: Number of Slice Registers: 0 out of 18,224 0% Number of Slice LUTs: 860 out of 9,112 9% Number used as logic: 860 out of 9,112 9% Number using O6 output only: 365 Number using O5 output only: 1 Number using O5 and O6: 494 Number used as ROM: 0 Number used as Memory: 0 out of 2,176 0% Slice Logic Distribution: Number of occupied Slices: 268 out of 2,278 11% Nummber of MUXCYs used: 540 out of 4,556 11% Number of LUT Flip Flop pairs used: 860 Number with an unused Flip Flop: 860 out of 860 100% Number with an unused LUT: 0 out of 860 0% Number of fully used LUT-FF pairs: 0 out of 860 0% Number of slice register sites lost to control set restrictions: 0 out of 18,224 0% A LUT Flip Flop pair for this architecture represents one LUT paired with one Flip Flop within a slice. A control set is a unique combination of clock, reset, set, and enable signals for a registered element. The Slice Logic Distribution report is not meaningful if the design is over-mapped for a non-slice resource or if Placement fails. IO Utilization: Number of bonded IOBs: 18 out of 232 7% Number of LOCed IOBs: 18 out of 18 100% Specific Feature Utilization: Number of RAMB16BWERs: 0 out of 32 0% Number of RAMB8BWERs: 0 out of 64 0% Number of BUFIO2/BUFIO2_2CLKs: 0 out of 32 0% Number of BUFIO2FB/BUFIO2FB_2CLKs: 0 out of 32 0% Number of BUFG/BUFGMUXs: 0 out of 16 0% Number of DCM/DCM_CLKGENs: 0 out of 4 0% Number of ILOGIC2/ISERDES2s: 0 out of 248 0% Number of IODELAY2/IODRP2/IODRP2_MCBs: 0 out of 248 0% Number of OLOGIC2/OSERDES2s: 0 out of 248 0% Number of BSCANs: 0 out of 4 0% Number of BUFHs: 0 out of 128 0% Number of BUFPLLs: 0 out of 8 0% Number of BUFPLL_MCBs: 0 out of 4 0% Number of DSP48A1s: 0 out of 32 0% Number of ICAPs: 0 out of 1 0% Number of MCBs: 0 out of 2 0% Number of PCILOGICSEs: 0 out of 2 0% Number of PLL_ADVs: 0 out of 2 0% Number of PMVs: 0 out of 1 0% Number of STARTUPs: 0 out of 1 0% Number of SUSPEND_SYNCs: 0 out of 1 0% Overall effort level (-ol): High Router effort level (-rl): High Starting initial Timing Analysis. REAL time: 5 secs Finished initial Timing Analysis. REAL time: 5 secs Starting Router Phase 1 : 4795 unrouted; REAL time: 6 secs Phase 2 : 4285 unrouted; REAL time: 6 secs Phase 3 : 2216 unrouted; REAL time: 7 secs Phase 4 : 2216 unrouted; (Par is working to improve performance) REAL time: 8 secs Updating file: ALUSHOW.ncd with current fully routed design. Phase 5 : 0 unrouted; (Par is working to improve performance) REAL time: 9 secs Phase 6 : 0 unrouted; (Par is working to improve performance) REAL time: 9 secs Phase 7 : 0 unrouted; (Par is working to improve performance) REAL time: 9 secs Phase 8 : 0 unrouted; (Par is working to improve performance) REAL time: 9 secs Phase 9 : 0 unrouted; (Par is working to improve performance) REAL time: 9 secs Phase 10 : 0 unrouted; (Par is working to improve performance) REAL time: 9 secs Total REAL time to Router completion: 9 secs Total CPU time to Router completion: 8 secs Partition Implementation Status ------------------------------- No Partitions were found in this design. ------------------------------- Generating "PAR" statistics. INFO:Par:459 - The Clock Report is not displayed in the non timing-driven mode. Timing Score: 0 (Setup: 0, Hold: 0) Generating Pad Report. All signals are completely routed. Total REAL time to PAR completion: 19 secs Total CPU time to PAR completion: 9 secs Peak Memory Usage: 317 MB Placer: Placement generated during map. Routing: Completed - No errors found. Number of error messages: 0 Number of warning messages: 0 Number of info messages: 2 Writing design to file ALUSHOW.ncd PAR done!